Chemical Name: γ-aminopropyltriethoxysilane
Corresponding foreign grades: Carbide Corp is an American of Union: A-1100 is
Dow Corning CO.'S .: the Z-6011
Shin-Etsu: KBM-903
Main chemical composition: NH2(CH2)3Si(OCH2CH5)3
Molecular weight: 221.4
Physical and chemical properties:
Appearance | colorless transparent liquid |
Flash point | 96°C |
Density: ρ (25°C) | 0.946 |
Refractive index n 25°C | 1.420 |
PH: | 9-10 |
Application areas:
Plastic products, rubber products, paints, inks, composite materials, magnetic materials, adhesives, casting, synthetic amino silicone oil, etc.
Application object:
1. Resins: phenolic, urea-formaldehyde, furan, nylon, polyurethane, unsaturated polyester, alkyd resin, acrylic resin and natural rubber, styrene-butadiene rubber, neoprene rubber, nitrile rubber, EPDM, PE, PP, PVC, S BS, etc.
2. Fillers: talc, kaolin, mica, white carbon black, wollastonite, glass fiber, Al(OH)3, Mg(OH)2, metals and their oxides, etc.
Product Features:
1. Widely used in composite materials to optimize the compatibility between polymers and inorganic materials in the composite materials; significantly improve the physical and mechanical properties of the composite materials such as tensile and bending resistance, as well as thermal properties, electrical properties, water resistance, etc. Suitable for various types of thermoplastic and thermosetting resins reinforced with glass fiber such as PP, PVC, PC, PA furan resin epoxy resin, phenolic resin, polyurethane, polyimide, melamine resin, the amount of KH-550 used at this time is: 0.2- After 1.0% treatment, the drying activation temperature is 105-120℃.
2. This product can be used as a raw material for a new generation of double amino modified silicone oil and a variety of silicone softening finishing agents. The silicone oil modified by KH-550 treatment has greater affinity for fibers, and can give various fibers soft, smooth, drape, antistatic, washable and wrinkle resistant effects.
3. This product is added to the butyronitrile-phenolic structural adhesive, polyethylene butyral-phenolic adhesive, polyurethane adhesive hot melt adhesive, the content of 1% or less, this product can increase the bonding strength by 60 % To 100%. Adding KH-550 to the polyurethane sealant and plastic melt sealant can make the sealant achieve long-term adhesion to other substrates such as glass, masonry, metal, etc. It has good stability and high elongation to the climate.
4. This product can be used as an adhesion promoter in paints and inks to improve adhesion, reduce curing temperature, and improve corrosion resistance.
5. The use of this product in the casting industry can reduce the amount of resin in the silica sand, increase the strength of the mold sand (about 30%) and reduce the amount of gas generated.
6. It can be used in magnetic materials to improve the dispersion and adhesion of magnetic powder particles in organic materials in plastic and rubber magnets, so that the magnetic particles have a higher orientation. Thereby obtaining better magnetic properties, improving the mechanical strength of magnetic materials, weather resistance and easy dry processing.
Examples of application effects:
Strength | Flexural strength (Mpa) | Retention% | Tensile strength (Mpa) | Compressive strength (Mpa) | Shear strength (Mpa) | Bending strength after aging Mpa | ||
project | Dry state | Wet state | Dry state | Wet state | ||||
Untreated glass fiber | 242 | 198 | 82 | 194 | 106 | 32 | 197 | 174 |
Processing glass fiber | 462 | 489 | 105 | 265 | 275 | 40 | 363 | 343 |
Percentage increase | 90 | 147 | - | 36 | 160 | 27 | 84 | 97 |
Note: The wet state is immersed in water at 35°C for 90 days. The results in the table show that: KH-550 can significantly improve the dry and wet mechanical properties of FRP.