Amino Modified Compound JSC-3907

Product physical properties:

1. Chemical composition: polymer interface polymer

2. Density (g/cm³): 0.90

3. Flash point: about 12℃

4. Appearance: transparent liquid

Second, product use: This product is applied to the specific auxiliary agent that enhances the adhesion of the glue to the substrate when the PP material is processed. This product is widely used in PP surface treatment, but PP has poor surface ability, low polarity, and often has poor adhesion and needs to be treated. Such as: flame method, corona, corrosion and other methods, but the above methods are complicated and cumbersome. In order to reduce the process, people often use this product to spray on the PP substrate to enhance the adhesion of the PP substrate, and then apply glue . This is a better method and a convenient, economical, time-saving and paint-saving method.

How to use:

1. Clean the surface of the PP workpiece.

2. Spraying/brushing PP treatment agent

3. Place the air for 10min-20min

4. Spray/brush the glue and bake for 30 minutes until the glue is dry.

5. Place 24H to inspect the finished product.

Packing specification : 25 kg/drum 180 kg/drum

Matters needing attention:

1. Avoid contact with eyes or skin. If it gets in contact with it, please wash it with plenty of water and soapy water and seek medical treatment in time.

2. The shelf life of the product is 12 months. It should be stored in a cool (below 30℃) dark place, well ventilated place, away from fire.

3. After opening this product, it should be sealed and stored in time to avoid failure.