Overview: JSC-1186 provides an adhesion promoting effect that can be stored stably without yellowing, while enhancing the adhesion performance in coatings and water-based adhesive/sealant systems. Can be used as a cross-linking agent or adhesion promoter, can improve water resistance and wet adhesion, and has good storage stability.
Nature
Specific gravity (25℃) | 1.0680+_0.0050 | ||
Boiling point | 315℃/0.45mmHg | purity | ≥98.0% (gas chromatography) |
Flash point | 112℃ | Viscosity | ≤16 centipoise |
Chroma | ≤ 10 | Refractive index (25℃) | 1.453±0.0050 |
Features and uses
1. Good wet and dry adhesion, no yellowing • Enhance bond strength and adhesion •
2. When the pH value is 6-8.0, JSC-1186 performs better in carboxyl group-containing emulsions (acrylic acid, styrene butadiene polyurethane, etc.). When JSC-1186 is used as an adhesion promoter in water-based systems, such as acrylic sealants, it can continuously and significantly improve water-based adhesion performance
Scope of application: Used as adhesion promoter and cross-linking agent for glass paint, wood paint, adhesive and sealant. For water-based, pre-emulsification is required.
Addition amount and use method: For resin solid content of 1-2%, epoxy coating must be added to the curing agent, the other is mixed with the resin first.
Storage: The storage condition is 0-40 degrees, the product storage should be placed in a cool and ventilated place, the container should be kept tight, away from heat and fire.
Note: Before painting, the grease and liquid water on the substrate must be wiped clean to avoid lowering the adhesion.